Unveiling the antibacterial strategies and mechanisms of MoS2: a comprehensive analysis and future directions.

Antibiotic resistance is a growing problem that requires alternative antibacterial agents. MoS2, a two-dimensional transition metal sulfide, has gained significant attention in recent years due to its exceptional photocatalytic performance, excellent infrared photothermal effect, and impressive antibacterial properties. This review presents a detailed analysis of the antibacterial strategies and mechanism of MoS2, starting with its morphology and synthesis methods and focusing on the different interaction stages between MoS2 and bacteria. The paper summarizes the main antibacterial mechanisms of MoS2, such as photocatalytic antibacterial, enzyme-like catalytic antibacterial, physical antibacterial, and photothermal-assisted antibacterial. It offers a comprehensive discussion focus on recent research studies of photocatalytic antibacterial mechanisms and categorizes them, guiding the application of MoS2 in the antibacterial field. Overall, the review provides an in-depth understanding of the antibacterial mechanisms of MoS2 and presents the challenges and future directions for the improvement of MoS2 in the field of high-efficiency antibacterial materials.

MoS2/PDA@Cu composite as a peroxidase-mimicking enzyme with high-effect antibacterial and anticancer activity.

Since nanozymes were proposed, their applications have become more and more extensive. As a research hotspot in recent years, MoS2 also shows many enzyme-like properties. However, as a novel peroxidase, MoS2 has the disadvantage of a low maximum reaction rate. In this study, the MoS2/PDA@Cu nanozyme was synthesized by a wet chemical method. The modification of PDA on the surface of MoS2 achieved the uniform growth of small-sized Cu Nps. The obtained MoS2/PDA@Cu nanozyme displayed excellent peroxidase-like activity and antibacterial properties. The minimum inhibitory concentration (MIC) of the MoS2/PDA@Cu nanozyme against S. aureus reached 25 µg mL-1. Furthermore, it showed a more pronounced inhibitory effect on bacterial growth with the addition of H2O2. The maximum reaction rate (Vmax) of the MoS2/PDA@Cu nanozyme is 29.33 × 10-8 M s-1, which is significantly higher as compared to that of HRP. It also exhibited excellent biocompatibility, hemocompatibility and potential anticancer properties. When the concentration of the nanozyme was 160 µg mL-1, the viabilities of 4T1 cells and Hep G2 cells were 45.07% and 32.35%, respectively. This work indicates that surface regulation and electronic transmission control are good strategies for improving peroxidase-like activity.

Phyto-Mediated Controllable Synthesis of ZnO Clusters with Bactericidal Activity.

The rapid development of antibiotic resistance has been considered a major threat to public health. Nanomaterials have risen to be an effective weapon to tackle this problem through multiple antibacterial mechanisms. The improved and tailored physiochemical properties of fine-tuned secondary nanoarchitectures contribute to the superior bactericidal actions of metal oxide structures. However, it is still challenging to construct secondary structures through mild green manufacturing methods. Here, we report the preferred antibacterial ZnO nanocrystal clusters formed by a green structure-tuning synthesis process, in which the primary ZnO nanoparticles with sizes <10 nm were assembled into different forms of clusters depending on the zinc salt concentration and temperature. ZnO clusters with a stable loose-assembly structure and a rougher surface exhibited better bactericidal ability with minimal inhibitory concentrations of 0.5 and 0.1 mg/mL against Escherichia coli and Staphylococcus aureus, respectively. The underlying mechanism is related to enhancing contact with bacteria, releasing small ZnO nanoparticles, and generating additional reactive oxygen species, which could aggravate the damage to bacterial cell membrane and eventually lead to bacterial death. Furthermore, attachment of phenolic compounds from olive leaf extract would promote membrane penetration by ZnO nanoparticles, resulting in the improvement of antibacterial activities, which profit from the green route mediated by Olea europaea leaf extract that could structure-tune ZnO nanocrystal clusters in one simple step that retains the active ingredients on the nanoparticles. This work proposes a feasible and clean strategy to improve the structure-bioactivity relationship of ZnO by controlling its growth into a preferable structure, and the developed ZnO clusters have a good prospect in antibacterial applications because of their excellent performance and green fabrication method.

Structural Evolution of Palygorskite as the Nanocarrier of Silver Nanoparticles for Improving Antibacterial Activity.

The carrier performance of palygorskite (Pal) can be significantly affected by its structure, morphology, and activity, which was regulated by controlling the dissolution degree of the metal-oxygen octahedron of raw Pal (RPal) under the action of oxalic acid (OA) in this study. The RPal and OA-leached RPal (OPal) then served as supports for immobilizing silver nanoparticles (AgNPs) to form RPal/AgNPs and OPal/AgNPs antibacterial nanocomposites. The structural and morphological characterizations were used to confirm the dispersion uniformity of AgNPs on the RPal and OPal nanorods, and antibacterial experiments were conducted to evaluate the performance of as-prepared composites and also investigate their antibacterial mechanism. The results showed that OPal-48h (OA leaching for 48 h) loaded with AgNPs (OPal-48h/AgNPs) possesses the most excellent and broad-spectrum antibacterial properties, where its minimum inhibitory concentration values against E. coli, S. aureus, ESBL-E. coli, and MRSA reached 0.25, 0.125, 0.25, and 0.5 mg/mL, respectively, which are mainly attributed to the optimal balance between surface activity and structural stability of OPal-48h that maximally increased its dispersibility and active sites, therefore contributing to the in situ formation of monodisperse AgNPs on the nanorods of OPal-48h.

Novel eco-friendly spherical porous adsorbent fabricated from Pickering middle internal phase emulsions for removal of Pb(II) and Cd (II).

Spherical porous materials prepared from the emulsion template used in the water treatment have displayed a vast prospect, as the high surface area, abundant porous structure, convenient operation and excellent adsorption performance. But the tedious fabrication process, high consumption of organic solvent and surfactant limited the application widely. Herein, a facile and eco-friendly spherical porous adsorbent (SPA) is fabricated from the green surfactant-free (corn oil)-in-water Pickering medium internal phase emulsions (Pickering MIPEs) via the convenient ion crosslinking procedure. The Pickering MIPEs synergistically stabilized with the semi-coke (SC), which is the natural particle produced from the shale oil distillation, and sodium alginate (SA) has excellent storage and anti-coalescence stability. The as-prepared porous adsorbent possessed the abundant pore structure, which provided favorable conditions for effective mass transfer in adsorption, and could be tuned by varying the SA dosage. The saturation adsorption capacities of Pb(II) and Cd(II) can be achieved with 460.54 and 278.77 mg/g within 45 min at 25°C, respectively. Overall, this study supplied a viable and eco-friendly route for fabricating the spherical porous adsorbent with a tunable porous structure for heavy metal ion wastewater.

Palygorskite-Based Organic-Inorganic Hybrid Nanocomposite for Enhanced Antibacterial Activities.

A synergistic antibacterial strategy is effective in enhancing the antibacterial efficacy of a single antibacterial material. Plant essential oils (PEOs) are safe antibacterial agents. However, some of their characteristics such as intense aroma, volatility, and poor thermal stability limit their antibacterial activity and applications. In this paper, five kinds of PEOs were incorporated onto ZnO/palygorskite (ZnO/PAL) nanoparticles by a simple adsorption process to form organic-inorganic nanocomposites (PEOs/ZnO/PAL) with excellent antibacterial properties. TEM and SEM analyses demonstrated that ZnO nanoparticles uniformly anchored onto the surface of rod-like PAL, and that the structure of ZnO/PAL maintained after the incorporation of ZnO nanoparticles and PEOs. It was found that carvacrol/ZnO/palygorskite (CAR/ZnO/PAL) exhibited higher antibacterial activities than other PEOs/ZnO/PAL nanocomposites, with minimum inhibitory concentration (MIC) values of 0.5 mg/mL and 1.5 mg/mL against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. Moreover, the antibacterial efficiency of CAR/ZnO/PAL nanocomposites was superior to that of ZnO/PAL and pure CAR, demonstrating the synergistic effect that occurs in the combined system. PAL serving as a carrier for the combination of organic PEOs and ZnO nanoparticles is an effective strategy for enhanced, clay-based, organic-inorganic hybrid antibacterial nanocomposites.

Synergistic Effect of Glycyrrhizic Acid and ZnO/Palygorskite on Improving Chitosan-Based Films and Their Potential Application in Wound Healing.

The synergistic effect of chitosan (CS), glycyrrhizic acid (GA) and ZnO/palygorskite (ZnO/PAL) as potential wound dressing was evaluated in the form of films by the solution casting method. The nanocomposite films were well-characterized with ATR-FTIR, XRD and SEM to explore the interactions between CS, GA and ZnO/PAL. Physical, mechanical and antibacterial properties of the nanocomposite films were systematically investigated for their reliability in end-up utilization. Importantly, it was found that the presence of PAL in the films provided enhanced mechanical properties, whereas CS, GA and ZnO supplied a broad-spectrum antibacterial activity, especially for drug-resistant bacteria such as ESBL-E. coli and MRSA. Overall, this research demonstrated that the prepared films can be a promising candidate for wound-care materials.

Multifunctional palygorskite@ZnO nanorods enhance simultaneously mechanical strength and antibacterial properties of chitosan-based film.

A general and effective strategy was developed for improving simultaneously the mechanical strength and antibacterial performance of biopolymer-based films. The well-dispersed zinc oxide (ZnO) nanoparticles were in-situ loaded on non-toxic natural palygorskite (PAL) nanorod to form an antibacterial PAL@ZnO composite nanorod, which can be embedded into chitosan/gelatin (CS/GL) film to produce the composite films with noticeably enhanced mechanical properties and antibacterial activity against S. aureus and E. coli bacteria (inhibition zones are 21.82 ± 0.95 mm and 16.36 ± 1.64 mm, respectively). The toughness of films enhances to 35.13 ± 0.95 MPa and the moisture uptake decreases to 23.74 ± 0.02% after embedding 3% and 9% of PAL@ZnO, respectively. In addition, incorporating PAL@ZnO nanorods also significantly enhanced the water resistance, and thermal stability of film. This work provides an alternative way for the development of antibacterial films with potential applications in many fields such as food packing.

Removal of antibiotics from aqueous solution by using porous adsorbent templated from eco-friendly Pickering aqueous foams.

The aqueous foam template without any solvent and only using the particles stabilizer has attracted much attention for preparation of the porous adsorbents. Herein, a novel porous adsorbent was fabricated via thermal-initiated polymerization of Pickering aqueous foams, which was stabilized by the natural sepiolite (Sep) and pine pollen, and utilized for the removal of antibiotic from aqueous solution. The stabilizing mechanism of Pickering aqueous foam of that the Sep was modified with the leaching substance from pine pollen and arranged orderly around the bubble to form a dense "shell" structure was revealed. The adsorbents possessed the hierarchical porous structure and excellent adsorption performance for antibiotic of chlorotetracycline hydrochloride (CTC) and tetracycline hydrochloride (TC). The equilibrium adsorption capacities of CTC and TC were achieved with 465.59 and 330.59 mg/g within 60 min at 25°C, respectively. The adsorption process obeyed Langmuir model and pseudo-second-order adsorption kinetic model. This work provided eco-friendly approach for fabricate porous adsorbents for wastewater treatment.

A Novel 3D-bioprinted Porous Nano Attapulgite Scaffolds with Good Performance for Bone Regeneration.

BACKGROUND: Natural clay nanomaterials are an emerging class of biomaterial with great potential for tissue engineering and regenerative medicine applications, most notably for osteogenesis. MATERIALS AND METHODS: Herein, for the first time, novel tissue engineering scaffolds were prepared by 3D bioprinter using nontoxic and bioactive natural attapulgite (ATP) nanorods as starting materials, with polyvinyl alcohol as binder, and then sintered to obtain final scaffolds. The microscopic morphology and structure of ATP particles and scaffolds were observed by transmission electron microscope and scanning electron microscope. In vitro biocompatibility and osteogenesis with osteogenic precursor cell (hBMSCs) were assayed using MTT method, Live/Dead cell staining, alizarin red staining and RT-PCR. In vivo bone regeneration was evaluated with micro-CT and histology analysis in rat cranium defect model. RESULTS: We successfully printed a novel porous nano-ATP scaffold designed with inner channels with a dimension of 500 µm and wall structures with a thickness of 330 µm. The porosity of current 3D-printed scaffolds ranges from 75% to 82% and the longitudinal compressive strength was up to 4.32±0.52 MPa. We found firstly that nano-ATP scaffolds with excellent biocompatibility for hBMSCscould upregulate the expression of osteogenesis-related genes bmp2 and runx2 and calcium deposits in vitro. Interestingly, micro-CT and histology analysis revealed abundant newly formed bone was observed along the defect margin, even above and within the 3D bioprinted porous ATP scaffolds in a rat cranial defect model. Furthermore, histology analysis demonstrated that bone was formed directly following a process similar to membranous ossification without any intermediate cartilage formation and that many newly formed blood vessels are within the pores of 3D-printed scaffolds at four and eight weeks. CONCLUSION: These results suggest that the 3D-printed porous nano-ATP scaffolds are promising candidates for bone tissue engineering by osteogenesis and angiogenesis.

Incorporation of quaternary ammonium chitooligosaccharides on ZnO/palygorskite nanocomposites for enhancing antibacterial activities.

Quaternary ammonium chitooligosaccharides (QACOS) was incorporated onto the ZnO/palygorskite (ZnO/PAL) nanocomposite by a simple electrostatic self-assembly process to produce a new organic-inorganic nanocomposite (QACOS/ZnO/PAL) with excellent antibacterial activity. After loading QACOS, the Zeta potential of ZnO/PAL was changed from -26.7 to +30.3 mV, which facilitates to improve the targeting behavior of ZnO/PAL towards bacteria and its contact with bacteria, resulting in a significant improvement of antibacterial capability. The MIC values of QACOS/ZnO/PAL for inhibiting bacteria (0.5 mg/mL for E. coli and 1 mg/L for S. aureus) were superior to ZnO/PAL and QACOS, demonstrated an expected synergistic antibacterial effect between QACOS and ZnO/PAL. The improved contact and interface interaction between QACOS/ZnO/PAL and bacteria makes it easier to destroy the structural integrity of bacteria. As a whole, the incorporation of polysaccharide as regulators of surface charge opens up a new way to further enhance the antibacterial activity of inorganic antibacterial materials.

Hydrothermal Fabrication of Spindle-Shaped ZnO/Palygorskite Nanocomposites Using Nonionic Surfactant for Enhancement of Antibacterial Activity.

In order to improve the antibacterial performance of natural palygorskite, spindle-like ZnO/palygorskite (ZnO/PAL) nanocomposites with controllable growth of ZnO on the surface of PAL were prepared in the presence of non-ionic surfactants using an easy-to-operate hydrothermal method. The obtained ZnO/PAL nanocomposites have a novel and special spindle-shaped structure and good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and are also low cost. The minimum inhibitory concentrations of ZnO/PAL nanocomposites toward E. coli and S. aureus reached 1.5 and 5 mg/mL, respectively.

Effects of palygorskite composites on growth performance and antioxidant status in broiler chickens.

This work aimed to investigate the effects of the palygorskite (PAL) composites on the growth performance and antioxidant status in broiler chickens. A total of 192 one-day-old Ross 308 broilers were randomly divided into 3 treatment groups. Broilers were fed basal diets supplemented with either 50 mg/kg chlortetracycline (CTC group), 1 g/kg ZnO/PAL (ZnO/PAL group), or 1 g/kg chitooligosaccharides/ZnO/PAL (COS/ZnO/PAL group), respectively. The results showed that PAL composites were found to exhibit similar effects on growth performance as CTC (P > 0.05). ZnO/PAL and COS/ZnO/PAL enhanced the activity of serum glutathione peroxidase (GSH-Px) compared with CTC both at 21 and 42 d (P < 0.05). Compared with the CTC group, COS/ZnO/PAL enhanced serum catalase (CAT) activity at 21 d (P < 0.05), and decreased serum malondialdehyde (MDA) content at 42 d (P < 0.05). Compared with the CTC group, ZnO/PAL decreased duodenal mucous MDA content at 21 d, while ZnO/PAL did not affect activities of superoxide dismutase (SOD) and GSH-Px in the duodenum (P > 0.05). The duodenal mucous activities of SOD and GSH-Px were the highest in the COS/ZnO/PAL group at 42 d (P < 0.05). At 21 d, broilers in the COS/ZnO/PAL group had the lowest MDA content and the highest total antioxidant capacity (T-AOC) in the jejunum (P < 0.05). Palygorskite composites decreased ileum mucous MDA content compared with CTC treated broilers at 21 d (P < 0.05). At 42 d, ileum mucous T-AOC was increased both in the ZnO/PAL and COS/ZnO/PAL groups compared with the CTC group (P < 0.05). The ileum mucous GSH-Px activities both in the ZnO/PAL and COS/ZnO/PAL groups were increased compared with the CTC group (P < 0.05). In conclusion, the broilers given the basal diet supplemented with the PAL composites exhibited similar growth performance to their counterparts in the AGP group. Additionally, the PAL composites improved the antioxidant status of broilers and the beneficial effects of COS/ZnO/PAL on the antioxidant status are more pronounced.

Optimal Synthesis of Environment-Friendly Iron Red Pigment from Natural Nanostructured Clay Minerals.

A series of environment-friendly clay minerals-α-Fe2O3 iron-red hybrid pigments-were prepared by a simple one-step hydrothermal reaction process using natural nanostructured silicate clay minerals as starting materials. The influence of structure, morphology and composition of different clay minerals on the structure, color properties, and stability of the pigments was studied comparatively by systematic structure characterizations with X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmittance electron microscope (TEM), X-ray fluorescence spectroscopy (XRF), X-ray photoelectron spectroscopy (XPS) and CIE-L*a*b* Colorimetric analyses. The results showed that the clay minerals act as green precipitants during the hydrothermal reaction to induce in-situ transformation of Fe(III) ions into Fe2O3 crystals. Meanwhile, they also act as the "micro-reactor" for forming Fe2O3 crystals and the supporter for inhibiting the aggregation of Fe2O3 nanoparticles. The color properties of iron-red hybrid pigments are closely related to the surface charges, surface silanol groups, and solid acid sites of clay minerals. The clay minerals with higher surface activity are more suitable to prepare iron-red pigments with better performance. The iron-red hybrid pigment derived from illite (ILL) clay showed the best red color performance with the color values of L* = 31.8, a* = 35.2, b* = 27.1, C* = 44.4 and h° = 37.6, and exhibited excellent stability in different chemical environments such as acid, alkaline, and also in high-temperature conditions.